Tone_Len_Disconnect_Handsfree; Key_Pad_Tone; Ddi_Icd_Group_Display - Panasonic KX-UT670 Administrator's Manual

Value Range
Default Value

TONE_LEN_DISCONNECT_HANDSFREE

Value Format
Description
Value Range
Default Value

KEY_PAD_TONE

Value Format
Description
Value Range
Default Value

DDI_ICD_GROUP_DISPLAY

Value Format
Description
Value Range
Default Value
Document Version 2012-07
1–15
10
Integer
Specifies the duration, in seconds, that a disconnect tone will be heard
while in hands-free mode when the other party ends a call.
1–15
3
Boolean
Selects whether a tone is heard in response to key presses.
Note
•
This setting does not affect the iWnn IME Keyboard. For details
about available keyboards, refer to the Operating Instructions
on the Panasonic Web site (® see Introduction).
•
If touch tones or selection tones are configured through phone
user interface programming, changes to this setting are
ignored.
•
Y (Enable Key Pad Tone)
•
N (Disable Key Pad Tone)
Y
Integer
Specifies the caller information or called party information displayed on
the unit when an incoming call is received.
•
0: Only the caller name is displayed.
•
1: The caller name is prioritized.
•
2: The ICD (Incoming Call Distribution)/DDI (Direct Dialing In) group
name is prioritized.
•
3: Only the ICD/DDI group name is displayed.
1
Section 5 Configuration File Programming
Administrator Guide 165