Section 5 Configuration File Programming
Value Range
Default Value
HOLD_TONE_TIMING
Value Format
Description
Value Range
Default Value
5.6.3 Telephone Settings
DISPLAY_NAME_REPLACE
Value Format
Description
Value Range
Default Value
NUMBER_MATCHING_LOWER_DIGIT
Value Format
Description
Value Range
Default Value
Web User Interface Reference
NUMBER_MATCHING_UPPER_DIGIT
Value Format
172
Administrator Guide
-24–6
0
Comma-separated Integer
Specifies the pattern, in milliseconds, of the hold tone using up to 10
whole numbers (off 1, on 1, off 2, on 2...) separated by commas.
Note
•
It is recommended that you set a value of 500 milliseconds or
more for the first value (off 1).
0–16000 (0: Infinite time)
500,190,190,190,2890
Boolean
Specifies whether the name saved in the phonebook is used in place
of the name display if a matching entry is found.
•
Y (Enable Display Name Replace)
•
N (Disable Display Name Replace)
Y
Integer
Specifies the minimum number of digits with which to match a
phonebook entry with an incoming call's caller ID. To specify exact
matching of entire numbers only, specify "0" for this parameter and
"NUMBER_MATCHING_UPPER_DIGIT".
0–15
7
Number Matching Lower Digit (Page 120)
Integer
Document Version 2012-07