Shared_Call_Enable_N; Fwd_Dnd_Synchro_Enable_N - Panasonic KX-UT670 Administrator's Manual

Section 5 Configuration File Programming

SHARED_CALL_ENABLE_n

Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference

FWD_DND_SYNCHRO_ENABLE_n

Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference
186 Administrator Guide
SHARED_CALL_ENABLE_1, SHARED_CALL_ENABLE_2, ...,
SHARED_CALL_ENABLE_6
Boolean
Specifies whether to enable the Shared Call feature of the SIP server,
which is used to share one line among the units.
Note
•
You cannot set both "SHARED_CALL_ENABLE_n" and
"FWD_DND_SYNCHRO_ENABLE_n" to "Y" at the same time.
•
Availability depends on your phone system.
•
Y (Enable shared call)
•
N (Disable shared call)
Note
•
If set to "Y", the SIP server will control the line by using a
shared-call signaling method.
•
If set to "N", the SIP server will control the line by using a
standard signaling method.
N
Enable Shared Call (Page 110)
FWD_DND_SYNCHRO_ENABLE_1, FWD_DND_SYNCHRO_ENABLE_2, ...,
FWD_DND_SYNCHRO_ENABLE_6
Boolean
Specifies whether to synchronize the Do Not Disturb and Call Forward
settings, configured via the Web user interface or phone user interface,
between the unit and the portal server that is provided by your phone
system dealer.
Note
•
Even if you specify "Y", this feature may not function properly if
your phone system does not support it. Before you configure
this setting, consult your phone system dealer.
•
You cannot set both "SHARED_CALL_ENABLE_n" and
"FWD_DND_SYNCHRO_ENABLE_n" to "Y" at the same time.
•
Y (Enable Do Not Disturb/Call Forward synchronization)
•
N (Disable Do Not Disturb/Call Forward synchronization)
N
Synchronize Do Not Disturb and Call Forward (Page 110)
Document Version 2012-07