Description
Value Range
Default Value
CUSTOM_WEB_PAGE
Value Format
Description
Value Range
Default Value
5.6 Telephone Settings
5.6.1 Call Control Settings
VM_SUBSCRIBE_ENABLE
Value Format
Description
Value Range
Default Value
Web User Interface Reference
Document Version 2012-07
Specifies whether to enable network and NTP server settings from the
unit.
Note
•
If you change this setting to "N" when network or NTP server
settings have been made through Web user interface
programming (® see 4.4.1 Basic Network Settings), clear
these settings once by performing Reset Web Settings from the
Web user interface, and then change this setting to "N".
•
Y (Enable network and NTP server settings)
•
N (Disable network and NTP server settings)
Y
Integer
Specifies whether to enable the settings in 4.4.1 Basic Network
Settings from the Web user interface when logged in with the User
account.
0–1
–
0: Enable "Basic Network Settings"
–
1: Disable "Basic Network Settings"
0
Boolean
Specifies whether to send the SUBSCRIBE request to a voice mail
server.
Note
•
Your phone system must support voice mail.
•
Y (Send the SUBSCRIBE request)
•
N (Do not send the SUBSCRIBE request)
N
Send SUBSCRIBE to Voice Mail Server (Page 105)
Section 5 Configuration File Programming
Administrator Guide
159