Section 4 Web User Interface Programming
4.9 Result Messages
When you click [Save] after changing the settings on the current configuration screen, one of the following
messages will appear in the upper-left area of the current configuration screen:
Result Message
Complete
Failed (Parameter Error)
Failed (Memory Access
Failure)
Failed (Transfer Failure)
Failed (Busy)
*1
"Failed (Transfer Failure)" may not be displayed depending on your Web browser.
Notice
•
Do not click the navigation buttons of your Web browser or open a new window to display the screen.
Otherwise, an error ("403 Forbidden") will occur when you click [Save].
126
Administrator Guide
The operation has successfully completed.
The operation failed because:
•
Some specified values are out of range
or invalid.
The operation failed because:
•
Access error to the flash memory
occurred while reading or writing the
data.
The operation failed because:
*1
•
A network error occurred during the
data transmission.
The operation failed because:
•
The unit is in an operation that
accesses the flash memory of the unit.
Description
Applicable Screens
All screens
All screens
All screens
All screens
All screens
Document Version 2012-07