Provisioning Server Setting Example - Panasonic KX-UT670 Administrator's Manual

Download Timing
None (prohibited)

2.4.3.5 Provisioning Server Setting Example

This section gives an example of how to set up the units and provisioning server when configuring 2 units with
configuration files. The standard configuration files and the master configuration file are used in this example.
Conditions
Item
Provisioning server FQDN
Units' MAC addresses
URL of the configuration files
File name of configuration
files
To set up the provisioning server
1.
Connect the units to the network, and turn them on.
a.
The unit with the MAC address 0080F0111111 accesses the following URLs:
http://prov.example.com/ConfigCommon.cfg
http://prov.example.com/Config0080F0111111.cfg
b.
The unit with the MAC address 0080F0222222 accesses the following URLs:
http://prov.example.com/ConfigCommon.cfg
http://prov.example.com/Config0080F0222222.cfg
Document Version 2012-07
If you want to prohibit units from changing their settings by downloading
configuration files, you can enable this function.
The following operations will be prohibited:
–
Provisioning at startup
–
Provisioning at regular intervals
–
Provisioning by sending a NOTIFY message
•
In the configuration file:
–
Add the line, PROVISION_ENABLE="N".
•
In the Web user interface:
–
Click the [Maintenance] tab, click [Provisioning Maintenance],
and then select [No] for [Enable Provisioning].
•
To enable provisioning again, in the Web user interface:
–
Click the [Maintenance] tab, click [Provisioning Maintenance],
and then select [Yes] for [Enable Provisioning].
prov.example.com
•
0080F0111111
•
0080F0222222
Configure the following 2 settings either by pre-provisioning or through the
Web user interface. The values of both settings must be the same.
•
CFG_STANDARD_FILE_PATH="http://prov.example.com/
Config{MAC}.cfg"
•
CFG_MASTER_FILE_PATH="http://prov.example.com/
ConfigCommon.cfg"
Store the following configuration files in the HTTP root directory.
•
Contains the common settings for the 2 units (master configuration file):
–
ConfigCommon.cfg
•
Contains the settings unique to each unit (standard configuration files):
–
Config0080F0111111.cfg
–
Config0080F0222222.cfg
Section 2 General Information on Programming
Explanation
Description/Setting
Administrator Guide 31