Section 5 Configuration File Programming
Value Range
Default Value
REDIALKEY_CALLLOG_ENABLE
Value Format
Description
Value Range
Default Value
ONHOOK_TRANSFER_ENABLE
Value Format
Description
Value Range
Default Value
DISCONNECTION_MODE
Value Format
Description
Value Range
Default Value
TONE_LEN_DISCONNECT_HANDSET
Value Format
Description
164
Administrator Guide
•
Y (Enable Auto Call Hold)
•
N (Disable Auto Call Hold)
N
Boolean
Specifies whether the call log is displayed when [Redial] is tapped
while on-hook.
•
Y (Displays outgoing call log when [Redial] is tapped.)
•
N (Redials last-called telephone number when [Redial] is tapped.)
N
Boolean
Specifies whether transfer operations are permitted while on-hook.
Note
•
When the mode for users with difficulties operating the touch
display directly (Accessibility mode) is enabled through phone
user interface programming, this setting is disabled.
•
Y (Enable On-hook Transfer)
•
N (Disable On-hook Transfer)
Y
Integer
Selects the reorder tone (ROT) or busy tone (BT) when a dial operation
fails.
1–2
–
1: Mode1 (ROT)
–
2: Mode2 (BT)
1
Integer
Specifies the duration, in seconds, that a disconnect tone will be heard
when the other party ends a call and the handset is being used.
Document Version 2012-07