Value Range
Default Value
Domain Name Server
Description
Value Range
Default Value
Phone User Interface
Reference
4.4.1.3 Static Settings
Static IP Address
Description
Value Range
Default Value
Phone User Interface
Reference
Document Version 2012-07
Max. 63 characters
Note
•
You cannot leave this field empty.
•
If "{MODEL}" is included in this parameter, it will be replaced
with the unit's model name.
{MODEL}
Selects whether to receive DNS server addresses automatically or to
assign a DNS server addresses (up to 2) manually.
Note
•
This setting is available only when [Connection Mode] is set
to [DHCP].
•
Receive DNS server address automatically
•
Use the following settings
–
DNS1
–
DNS2
Note
•
If you select [Use the following settings], specify the IP
address(es) of the primary and, if necessary, secondary DNS
server(s) manually.
Receive DNS server address automatically
Network Settings (Page 16)
Specifies the IP address for the unit.
Note
•
This setting is available only when [Connection Mode] is set
to [Static].
Max. 15 characters
Not stored.
Network Settings (Page 16)
Section 4 Web User Interface Programming
Administrator Guide
71