Sysname - 3Com Switch 4500 Family Manual

Parameters
unit-id: Unit ID of a device.
unit-name: Name of the specified unit, a string of 1 to 64 characters.
Description
Use the set unit name command to set a name for a device. Device name visually identifies a device
by showing its location, role in the fabric, and connected networks, thus facilitating configuration and
maintenance.
Examples
# Set the name to hello for the device with unit ID 1.
<Sysname> display xrn-fabric
Fabric name is Sysname, system mode is L3.
Unit Name
First
Second
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] set unit 1 name hello
[Sysname] display xrn-fabric
Fabric name is Sysname, system mode is L3.
Unit Name
hello
Second

sysname

Syntax
sysname sysname
undo sysname
View
System view
Parameters
sysname: Name of the specified fabric, a string of 1 to 30 characters.
Description
Use the sysname command to set the name for the fabric where a device belongs. The modification will
affect the prompt character in the command line interface. For example, if the fabric name of the
Ethernet switch is 4500, the prompt character in user view is <4500>.
Use the undo sysname command to restore the default fabric name.
Before a new device is added into a fabric, make sure that the fabric name of the device and the fabric
name of the devices in the fabric are consistent. You can enable the XRN automatic fabric function by
using the fabric member-auto-update software enable command to configure the device to
synchronize the fabric name automatically.
Unit ID
1
2(*)
Unit ID
1
2(*)
1-14