Interface - 3Com Switch 4500 Family Manual

Description
Use the giant-frame statistics enable command to enable the giant-frame statistics function.
Use the undo giant-frame statistics enable command to disable the giant-frame statistics function.
By default, the giant-frame statistics function is not enabled.
After enabling the giant-frame statistics function, you can use the display interface command to view
the statistics about giant frames.
Giant frames refer to VLAN untagged frames of more than 1518 bytes and VLAN tagged frames of
more than 1522 bytes.
Examples
# Enable the giant-frame statistics function.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] giant-frame statistics enable

interface

Syntax
interface interface-type interface-number
View
System view
Parameters
interface-type: Port type, which can be Aux, Ethernet, GigabitEthernet, LoopBack, NULL or
VLAN-interface.
interface-number: Port number, in the format of Unit ID/slot number/port number, where:
Unit ID is in the range of 1 to 8;
The slot number is 0 if the port is an Ethernet port, the slot number is 1 if the port is a GigabitEthernet
port.
The port number is relevant to the device.
Description
Use the interface command to enter specific port view. To configure an Ethernet port, you need to enter
Ethernet port view first.
Examples
# Enter Ethernet 1/0/1 port view.
1-16