Rmon History - 3Com Switch 4500 Family Manual

description string: Specifies the event description, a string of 1 to 127 characters.
log: Logs events.
trap: Sends traps to the NMS.
trap-community: Community name of the NMS that receives the traps, a string of 1 to 127 characters.
log-trap: Logs the event and sends traps to the NMS.
log-trapcommunity: Community name of the NMS that receives the traps, a character string of 1 to 127
characters.
none: Specifies that the event triggers no action.
owner text: Specifies the owner of the event entry, a string of 1 to 127 characters.
Description
Use the rmon event command to add an entry to the event table. If you do not specify the owner text
keyword/argument combination, the owner of the entry is displayed as "null".
Use the undo rmon event command to remove an entry from the event table.
When adding an event entry to an event table, you need to specify the event index. You need also to
specify the corresponding actions, including logging the event, sending traps to the NMS, and the both,
for the network device to perform corresponding operation when an alarm referencing the event is
triggered.
Examples
# Add the event entry numbered 10 to the event table and configure it to be a log event.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] rmon event 10 log

rmon history

Syntax
rmon history entry-number buckets number interval sampling-interval [ owner text ]
undo rmon history entry-number
View
Ethernet port view
Parameters
entry-number: History entry index, in the range of 1 to 65535.
buckets number: Specifies the size of the history table that corresponds to the entry, in the range 1 to
65535.
interval sampling-interval: Specifies the sampling interval (in seconds). The sampling-interval
argument ranges from 5 to 3600.
owner text: Specifies the owner of the entry, a string of 1 to 127 characters.
2-11