Amount - TEC MA-1650-4 Series Programming Manual

2. To read out the data of programming operations without a Submode No., the following operation will read all the
data together:
1 0 0
3. Zone destination is possible in reading the PLU TABLE:
1 0 4
NOTE: On depressing the [AT/TL] key, the programmed data will be printed. To abort printing once started,
depress the [ITEM CORR] or [VOID] key. The reading operation is immediately stopped halfway.
Tax Calculation Test
CONDITION
OPERATION
Enter any amount.
Displays the entered amount.
NOTE: Whether Taxes 1 to 4 amounts calculated are
printed or not depends on the selection of "RE-
PORT ITEM PRINT/NON-PRINT SETTING
(Submode 28)."
[AT/TL]
To read the data of the following operations:
• % + and % - PRESET RATE
• SELECTIVE ITEMIZER RATE
• FOREIGN CURRENCY EXCHANGE RATE
• TAX TABLE (For tax calculation test, refer to the next page.)
• GST RATE
[ST] |Zone -start PLU Code| [@/FOR] |Zone-end PLU Code|
Any time outside a sale
Mode Lock: X or SET
Depress [TXBL TL]
Displays the tax amount
(Tax 1 + Tax 2 + Tax 3 +
Tax 4) is displayed,
issuing a receipt such as
below.
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
11-14-1994 MON #1
PX
TAX1
TAX2
TAX3
TAX4
0076
- 181 -
MA-1650-4 SERIES
[AT/TL]
$100.00 Entered Amount
$6.00 Tax 1 amount calculated
$5.00 Tax 2 amount calculated
$4.00 Tax 3 amount calculated
$3.00 Tax 4 amount calculated
EO3-11070