TEC MA-1650-4 Series Programming Manual page 190

3.2 TO START-UP USING A PC OR A PL-3
To perform start-up using the PC or the PL-3, refer to the stand-alone level start-up procedure.
1) When performing a DLL directed from the PC, only the terminals actually connected should be designated
in the terminal list attached to the PC command.
2) To perform start-up using the PL-3, install programming data in the master terminal only and download
these data to the satellite terminals.
- 4 -
EO3-11070
MA-1650-4 SERIES