TEC MA-1650-4 Series Programming Manual page 29

Using TKB-1 (Programming Keyboard; hardware option)
Shift Keys (1 to 4), Shift Lock Key
Used to designate the shift of the character keys. Each character has three different characters, each of which
is designated by the Shift Key 1 to Shift Key 3. (The Shift Key 4 is not used for the MA-1650 series models.)
Shift Key 2 and Shift Key 3 are effective for one following character only. After that, the Shift 1 mode is
automatically regained.
The Shift Lock Key is used to hold the shifted status for a series of characters. To change the shifted status
locked by the Shift Lock Key, one of the Shift Keys (1 to 3) must be pressed prior to the character key
depression.
Character Keys
Used to enter alpha/numerics as characters. In setting a name or message, simply depress the corresponding
character key here, instead of a character code and the [#] key combination on the ECR keyboard.
ex.)
A ä
The numeric keys [1] through [0] (on the second row from the top) are used as character keys (i.e. the entered
number will be part of the name or message to be printed).
Also note that those numeric keys may be entered in the Shift 1, 2, or 3 mode.
"A" is entered in the Shift 1 mode.
Operate:
"a" is entered in the Shift 2 mode.
Operate:
"ä" is entered in the Shift 3 mode.
Operate:
- 26 -
([SFT1]) [A ä]
[SFT2] [A ä]
[SFT3] [A ä]
EO3-11070
MA-1650-4 SERIES