TEC MA-1650-4 Series Programming Manual page 94

NOTES: 1. The "Address Nos" designation at the top after "4 [X]" can be skipped if not necessary. If entered,
the designated Address(es) will automatically be accessed after the PLU Code designation. (The
idea is the same as the Address Nos Designation in the DEPARTMENT PROGRAMMING
operation.)
2. A maximum of 65,000 PLUs are programmable (varies depending on the capacity and allocation
of the RAM). Also refer to the "CODING PLUs" to be described at the end of this section. The
"[PLU]" key here indicates the key labeled simply as "PLU" but not any PLU Preset-code Keys.
To program bar code scanning, the expansion memory should be installed.
3. When the Address No. is sequential from the preceding address (if the Address Designation
feature has not been used), the Address No. and the following [ST] can be omitted.
4. The programming contents of each address are further described in the PLU TABLE PROGRAM-
MING CONTENTS below.
Address No.
1 Linked Department Code
2 PLU Name (Descriptor)
3 Preset Price
PLU TABLE PROGRAMMING CONTENTS
Description of Programming Contents
Enter the 2-digit code of the department to which the PLU is linked. When the
PLU is newly programmed, this entry is compulsory (an error will result if this
entry is skipped.)
[#]
1 to 99
Enter a maximum of 16 regular-sized or 8 double-sized characters. See the
CHARACTER ENTRIES at the beginning of this chapter. End with [ST].
When no name is programmed for a PLU, the following will be the auto-program
name for printing:
PLUxxxxxx (for PLU Code Max. 6-digit feature)
PLUxxxxxxxxxxxxx (for PLU Code Max. 13-digit feature)
(The "PLU" portion is programmable in the PRINT LINE ITEM NAME
PROGRAMMING operation, Submode 10. "xx ... x" is the PLU Code.)
• For a preset PLU (preset-price PLU), enter a maximum of 6-digit price, and
depress [#].
1 to 999999 (result: $0.01 to $9999.99)
When the option "Preset Point for one decimal digit allowed" is selected, the
decimal digit can be entered after entering a maximum of 5 integer digits and
the [•] key.
1 to 99999 (result: $0.01 to $999.99)
0.1 to 99999.9 (result: $0.001 to $999.999)
• A zero-price ($0.00) may be preset by entering 0 in the above operation.
• When no numerics are entered and the [#] key is simply depressed, the
PLU will be an open PLU (open-price PLU).
-- Continued on next page --
or
- 91 -
EO3-11070B
MA-1650-4 SERIES