TEC MA-1650-4 Series Programming Manual page 121

MAJOR GROUP NAME PROGRAMMING (Submode 14)
In this operation, the name of each Major Group is programmed. Which Departments and Minor Groups are linked
to each Major Group has already been set in the DEPARTMENT PROGRAMMING operation, Submode 3.
CONDITION
OPERATION
14 [X]
NOTE: A maximum of 12 regular-sized characters may be set for each Major Group name. One double-sized
character occupies two regular-sized characters' space. Also see the CHARACTER ENTRIES at the
beginning of this chapter. If no name is programmed for a Major Group, an auto-preset data is assigned
as the Major Group Name (MGPxx; xx = Major Group Code 01 to 10).
ex.) To program the following names to the respective Minor Groups::
Major Group 1
Major Group 2
Major Group 3
Key Operation Mode Lock: SET, enter 14, depress [X].
1 [ST] (MGP Code)
[X] [X] (all double-sized declaration)
406 [#] 502 [#] 405 [#] 503 [#] 408 [#] [ST] (Name: FRESH)
2 [ST] (MGP Code)
[X] [X] (all double-sized declaration)
413 [#] 504 [#] 408 [#] 405 [#] 502 [#] [ST] (Name: MANUF)
2 [ST] (MGP Code)
[X] [X] (all double-sized declaration)
415 [#] 504 [#] 408 [#] 405 [#] 502 [#] [ST] (Name: OTHER)
[AT/TL] (to complete this submode)
Any time outside a sale
Mode Lock: SET
|Minor Group Code| [ST]
(1 to 10)
Repeat for other groups (max. 10 groups)
F
V R E
M A N
O T H
Character Entries
(See NOTE 1)
*
S H
U F
E R
- 118 -
MA-1650-4 SERIES
[ST] [AT/TL]
* (For sequentially programming
Group Codes and Names, the
code specification can be
skipped.)
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
11-14-1994 MON #1
P14
01FRESH
02MANUF
03OTHER
0044
EO3-11070