Department Preset Price Setting Or Changing - TEC MA-1650-4 Series Programming Manual

DEPARTMENT PRESET PRICE SETTING OR CHANGING

The preset price of each department may be set in the DEPARTMENT TABLE PROGRAMMING (Submode 3)
already described. However, in setting or changing the price only but not other programmed data, the following
operation will be more convenient.
CONDITION
OPERATION
Repeatable for other departments.
|New Preset Price| [DEPT]
Max. 6 digits; 0 to 999999
(result: $0.00 to $9999.99)
NOTE 1
Using the [DP#] Key:
|Dept Code| [DP#]
Repeatable for other departments.
To change a preset-price department into an open department, skip the "New Preset Price" entry and simply
depress the [DEPT] key (in the first operation pattern) or simply depress the [#] key (in the second operation
pattern). Presetting a zero-price is also possible.
ex.) To set the following preset prices of departments:
Dept.13 ...... $1,40
Dept.14 ...... $2,10
OPERATION
Mode Lock: SET
By the first operation pattern:
140 [DEPT 13]
210 [DEPT 14]
By the second operation pattern:
13 [DP#] 140 [#]
(14 [DP#] 210 [#])
[AT/TL]
Any time outside a sale
Mode Lock: SET
NOTE2
|New Preset Price| [#]
Repeatable from here when
the Dept Code is sequential.
[AT/TL]
NOTE 1: With the option "Preset Point for one decimal digit allowed", 0 to
99999.9 (result: $0.000 to $999.999), using the [.] key.
NOTE 2: The "[DEPT]" here indicates a Department Preset-code Key. When
the [DP#] key is used, see the operation below.
- 168 -
[AT/TL]
TEC
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
11-14-1994
P00
13DP13
14DP14
EO3-11070
MA-1650-4 SERIES
STORE
MON #1
1.40@
2.10@
0083