TEC MA-1650-4 Series Programming Manual page 202

TERMINAL ID SETTING (Submode 77)
This submode is available for in-line terminals (including the master and backup master terminals). It must be
operated separately on each terminal since the Terminal ID should vary from terminal to terminal. The data set
in this submode is used as the in-line address of the terminal for in-line service operations.
CONDITION
OPERATION
77 [X] |Terminal ID No.|
Assign No. of 1 to 16.
1:
2:
3 to 16: Satellites
ex.) To assign Terminal ID No. 4 to the terminal used as a Satellite
Terminal of the in-line system:
Mode Lock: SET, enter 77, depress [X].
Enter 4, depress [AT/TL]
NOTE: Be certain not to set the same terminal ID No. to terminals on the
in-line system.
If terminals with the same ID No. exist on the in-line system,
malfunction may occur.
At this time, it is necessary to execute the status clear for all the
terminals on the in-line system.
Any time outside a sale
Mode Lock: SET
Master
Backup Master
[AT/TL]
- 16 -
EO3-11070
MA-1650-4 SERIES
TEC STORE
1343 PEACH DRIVE
PHONE : 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
12-19-1994 MON #1
P77
0011 14:16TM
04