TEC MA-1650-4 Series Programming Manual page 75

ADDRESS No.
46 IN-LINE OPTION
BIT ITEM
No.
Copying of Backup Data
1
Retry for Collection
2
Retry for DLL
3
Reports are issued from
Satellite at In-Line Reset
4
Report taking
Individual ECR Financial
Reports from Master at In-
5
line Reset Report taking
Individual ECR Financial
Reports from Master at In-
6
line Read Report taking
Reset Data Protection in
Communication Buffer
7
-- vacant --
8
Status selection in this address are effective only when the ECR has installed the RTR IFU and a RAM Clear has been operated.
Otherwise, each bit status selection will be disregarded.
Bit 1 SET status: The Backup Data Auto Copying feature is adopted, in which case Manual Copying is allowed as well.
Bit 2 SET status: In in-line read or reset report takings (including Terminal Open Check), when there is any uncollected ECRs and the
operator's Retry or Abort waiting lasts 10 seconds, an Auto Retry will be started and repeats the cycle of 10 seconds;
Waiting and Retry. When the operator performs a manual Retry during that 10 seconds' period or performed an Abort,
the manual operation will be effective. When a power failure occurs in the 10 seconds; Waiting status, the count will be
started from the remaining of the Wait time after the power recovery.
Bit 3 SET status: Auto-retry is performed during DLL. For operation, refer to the explanation for Bit 2.
Bit 4: This determines whether reports are issued form Satellite ECRs or not at the time of in-line Reset Report takings.
When the CVS feature is selected, this bit does not function. The status is fixed at "Not issue".
Bit 5: This determines whether reports of individual ECRs' Financial Reports (Daily and GT) are issued from the Master
Terminal at the time of in-line Reset Report takings.
Bit 6: This determines whether reports of individual ECRs' Financial Reports (Daily and GT) are issued from the Master
Terminal at the time of in-line Read Report takings.
SYSTEM OPTION TABLE
CONTENTS
SELECTIVE STATUS
Manual Copying only
RESET
SET Auto Copying feature
RESET Manual Retry only
Auto Retry feature
SET
RESET Manual Retry only
SET Auto Retry feature
RESET Issue
Not issue
SET
RESET Issue
SET Not issue
RESET Issue
Not issue
SET
RESET Rewriting Prohibited
SET Rewriting Allowed
RESET
SET
- 72 -
Standard Bit Set (auto-set by RAM Clear)
456
REMARKS
STANDARD
STATUS
*
*
*
*
*
*
*
*
EO3-11070
MA-1650-4 SERIES