TEC MA-1650-4 Series Programming Manual page 130

CREDIT CARD COMPANY ID CODE AND NAME PROGRAMMING
(Submode 21)
This operation programs the name of each credit card company. In sales entries, credit cards of maximum 12
different companies may be used by entering the ID code for the company (1 to 12) and then depressing the
[CARD No.] key prior to the [Chg] key for finalizing a sale. If no name is programmed for the company ID code,
the auto-preset name ("CRT01" to "CRT12") will be printed as the credit card company name on sale receipts and
reports.
CONDITION
OPERATION
21 [X]
assigned by the store
NOTE: A maximum of 12 regular-sized or 6 double-sized characters may be entered for a company name. A
combination of both types is also available. (See CHARACTER ENTRIES at the beginning of this
chapter.)
ex.) To assign the ID codes and program the names as follows:
CODE
1
2
3
4
Any time outside a sale
Mode Lock: SET
|Company ID Code| [ST]
1 to 12
Repeat for other companies.
NAME
Mode Lock to SET.
21 [X].
ABC 1 [ST] 401 [#] (A)
LMN 2 [ST] 412 [#] (L)
OPQ 3 [ST] 415 [#] (O)
XYZ 4 [ST] 508 [#] (X)
[AT/TL]
Character Entries
*
See NOTE below.
402 [#] (h)
403 [#] (C)
[ST]
413 [#] (M)
414 [#] (N)
[ST]
500 [#] (P)
501 [#] (Q)
[ST]
509 [#] (Y)
510 [#] (Z)
[ST]
- 127 -
MA-1650-4 SERIES
[ST] [AT/TL]
* (For sequentially
programming codes,
the ID code specifica-
tion can be skipped.)
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
11-14-1994 MON #1
P21
01 ABC
02 LMN
03 OPQ
04 XYZ
0051
EO3-11070