15.8 System Reset
Use this feature to reset the system while retaining the currently programmed settings. Reset the system only when
advised to do so by technical support personnel.
· WARNING
This process will restart the phone system and disconnect all currently connected calls.
· The system reset begins immediately. It takes approximately 5 minutes.
To reset the system (ETR 18D/34D)
1. At a system administration extension (10 and 11); with the phone idle press Feature 0 0 followed by two presses
of Intercom 1. System Administration: is shown on the display.
2. Dial #728.
3. At the Reset - Save All prompt press
To reset the system (1408/1416 Phone)
1. At either of the system administration telephones (extensions 10 and 11), with the phone idle press Admin.
2. Use the
up or down
Select.
3. Dial #728.
4. At the Reset - Save All prompt press Proceed.
PARTNER Phone Administration
IP Office PARTNER Version
Enter
.
14
arrow buttons to scroll the display to System Administration. When displayed, press
Page 158
- Issue 1b (22 February 2010)