15.7 System Default
Use this feature to reset the system and return its configuration to the default settings. Reset the system only when
advised to do so by technical support personnel.
· WARNING
This process will restart the phone system and disconnect all currently connected calls.
· The system reset begins immediately. It takes approximately 5 minutes.
To default the system (ETR 18D/34D)
1. At a system administration extension (10 and 11); with the phone idle press Feature 0 0 followed by two presses
of Intercom 1. System Administration: is shown on the display.
2. Dial #989.
3. When the Restart - Defaults: prompt is displayed, dial 25327 (C L E A R).
4. The system will be immediately restarted.
To default the system (1408/1416 Phone)
1. At either of the system administration telephones (extensions 10 and 11), with the phone idle press Admin.
2. Use the
up or down
Select.
3. Dial #989.
4. When the Restart - Defaults: prompt is displayed, dial 25327 (C L E A R).
5. The system will be immediately restarted.
PARTNER Phone Administration
IP Office PARTNER Version
arrow buttons to scroll the display to System Administration. When displayed, press
System Maintenance: System Copy
- Issue 1b (22 February 2010)
Page 157