Registering A File For Polling On The Bulletin Board ([Polling Tx]); Polling Tx (Bulletin Board); Operations Required To Use Polling Tx (Bulletin) - Olivetti d-COLOR MF652 User Manual

4
4.15

Registering a file for polling on the bulletin board ([Polling TX])

Polling TX (Bulletin Board)

The Polling TX function stores a file beforehand on the Bulletin Board User Box on this machine and sends it
out upon a request for reception (polling request) from the recipient.
The file registered on the Bulletin Board User Box is sent out upon reception of a polling request.
Only one file can be stored in each Bulletin Board User Box. You can create up to 10 Bulletin Board User
Boxes, allowing you to use them for different purposes.
Tips
- The files for polling that are registered with the bulletin board will not be deleted from the box after they
have been transmitted upon reception of a polling request from a receiving machine. They are stored
according to the file storage period specified for the appropriate Bulletin User Box.
- This function cannot be used together with the following functions:
– Timer TX, Relay Distribution, Confidential Communication, Line Selection, ECM OFF, V34 OFF, Quick
Memory TX, Overseas TX, Password TX, Polling TX, Polling RX, Polling RX (Bulletin Board).
d
Reference
Polling RX can be used to receive a file saved in a Bulletin User Box in a receiving machine by sending a re-
quest from this machine. For details, refer to page 6-14.

Operations required to use Polling TX (Bulletin)

Register the Bulletin Board User Box for registering files for polling.
For details on the registration procedure, refer to [User's Guide: Box Operations].
4-24
Registering a file for polling on the bulletin board ([Polling TX]) 4.15
d-Color MF752/652