[Individual Receiving Line Setup]; [Individual Sender Line Setup]; [Function Settings]; [Function On/Off Setting] - Olivetti d-COLOR MF652 User Manual

11

[Individual Receiving Line Setup]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [TX/RX Settings] - [Individual Receiving Line
Setup]
Select whether to receive faxes via respective lines separately if two lines are operating.
In receiving faxes per line, you can use reception functions, such as TSI Routing and Forward TX.
[OFF] is specified by default.

[Individual Sender Line Setup]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [TX/RX Settings] - [Individual Sender Line Set-
up]
Select whether to use different sender names for the respective lines if two lines are operating.
[OFF] is specified by default.

[Function Settings]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings]
Configure the settings for using various fax transmission and reception functions.
Settings

[Function ON/OFF Setting]

[Memory RX Setting]
[Closed Network RX]
[Forward TX Setting]
[Incomplete TX Hold]
[PC-Fax Permission Set-
ting]
[PC-Fax RX Setting]
[TSI User Box Setting]
[Function ON/OFF Setting]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [Function ON/OFF Setting]
Enable or disable fax transmission and reception functions, such as Confirm Address that prevents wrong
fax transmission, F-Code TX, and Relay RX.
Settings
[F-Code TX]
[Relay RX]
[Relay Printing]
[Destination Check Display
Function]
[Confirm Address (TX)]
[Confirm Address (Regis-
ter)]
11-22
Description
Enable or disable fax transmission and reception functions, such as Con-
firm Address that prevents wrong fax transmission, F-Code TX, and Relay
RX.
Configure the settings for using the Memory RX function.
Configure the settings for using the Closed Network RX function.
Configure the settings for using the Forward TX function.
Configure the settings for using the Fax Retransmit function.
Select whether to allow PC-Fax TX using the fax driver.
Configure the settings for using the PC-Fax RX function.
Configure the settings for using the TSI Routing function.
Description
Select whether to use the F-Code TX function.
F-Code TX is a function that sends documents to a destination by entering
a SUB address and a sender ID (communication password) of a specific
user box. The remote machine must support the F-Code TX/RX.
Select whether to use this machine as a fax relaying station.
If this machine is used as a relaying station, it is possible to receive a fax
from a remote machine and automatically relay it to multiple programmed
destinations.
Select whether to distribute and print a received fax when this machine is
used as a fax relaying station.
Select whether to show a list of specified destinations before sending a fax.
Select whether to require the user to enter a fax number twice to send a
fax by directly entering the fax number.
Select whether to require the user enter a fax number twice to register it
when, for example, registering a destination or forwarding destination.
d-Color MF752/652