[Quick Memory Tx] - Olivetti d-COLOR MF652 User Manual

9
Settings
[Select Line]

[Quick Memory TX]

To display: [Scan/Fax] - [Application] - [Fax Setting] - [Quick Memory TX]
As one page is scanned, fax transmission starts. Generally, transmission begins after all pages have been
scanned and saved in memory (Memory TX). With Quick Memory TX, many pages can be faxed without caus-
ing memory overflow.
Settings
[ON]/[OFF]
[Number of Pages]
Tips
- Generally, a fax is sent after all pages are scanned and saved in memory (Memory TX).
- You cannot specify both Quick Memory TX and [Fax Header Settings] at the same time.
9-24
Description
If two lines are used, select the line used to send a fax.
If [No Selection] is selected, either line, whichever is not busy, is used for
transmission.
Description
Select [ON] to specify Quick Memory TX.
If you want to show the total number of pages in the relevant column in the
sender information, select this option and enter the number of pages. With
this information, the destination can see the remaining number of pages to
be received.
d-Color MF752/652