Sending One Scanned Page At A Time ([Quick Memory Send]); Quick Memory Tx; Operation Flow - Olivetti d-COLOR MF652 User Manual

4.11

Sending one scanned page at a time ([Quick Memory Send])

4.11 Sending one scanned page at a time ([Quick Memory Send])

Quick Memory TX

Quick Memory TX is a method to start sending a fax as soon as one page of the original has been scanned.
The total number of pages transmitted can be entered in the sender record.
Normally, this machine begins transmission after all pages have been scanned and saved in memory (Mem-
ory TX). With Quick Memory TX , the overall processing time can be reduced. With this method, many pages
can be faxed without causing memory overflow.
Tips
- This function cannot be used together with the following functions:
– Timer TX, Polling TX, Polling TX (Bulletin Board), Polling RX, Polling RX (Bulletin Board)
- Enabling the TX Stamp function when the Quick Memory TX function is enabled causes Quick Memory
TX to be canceled.

Operation flow

1
Load the original.
2
Tap [Scan/Fax].
3
Specify the destination.
4
Tap [Application] - [Fax Setting] - [Quick Memory Send], then tap [ON].
5
To add the total number of pages to the sender record, select [Number of Pages], enter the number of
original pages using the Keypad, then tap [OK].
6
Press the Start key.
As one page is scanned, transmission starts.
d-Color MF752/652
4
4-19