Siemens SIMATIC S7-200 System Manual page 243

Adding a Connection
Use the Connection wizard to add a new connection, remove, or edit a connection as shown in
Figure 7-24.
Connection
Wizard
1. Double-click the icon in the Communications Setup window.
2. Double-click the PC/PPI cable to open the PG/PC interface. Select the PPI cable and click
the Properties button. On the Local Connection tab, check the Modem Connection box.
3. Double-click the modem Connect icon in the Communications dialog.
4. Click the Settings button to display the Modem Connections Settings dialog box.
5. Click the Add button to start the Add Modem Connection wizard.
6. Configure the connection as prompted by the wizard.
Figure 7-24 Adding a Modem Connection
Connecting to the S7-200 with a Modem
After you have added a modem
connection, you can connect to an
S7-200 CPU.
1. Open the Communications dialog
box and double-click on the
Connect icon to display the
Modem Connection dialog box.
2. In the Modem Connection dialog
box, click Connect to dial the
modem.
4.
Communicating over a Network
5.
Figure 7-25 Connecting to the S7-200
Chapter 7
6.
1.
2.
229