Audio Issue - SOYO SY-KT400 Dragon Ultra User Manual

1. Make sure that you have installed the VIA 4 in 1 driver.
2. Install/ re-install the VGA driver.
After wake-up from Suspend to RAM or Standby mode, the screen has
no display but I can hear the hard disk operating
1. Install VIA 4 in 1 driver.
2. Check the VGA card manufacturer for driver update, or make sure
the VGA card support Suspend to Ram function

Audio Issue

How can I disable the on-board Audio?
Go to the SOYO Combo Feature in the BIOS setup, then set the "onboard
6CH H/W audio" to disable.
I cannot get the sound working on my system.
1. Check if the speaker wire is connected to the line out connector in
the M/B.
2. Check if the speaker power is powered on.
3. Install the audio driver supplied on our driver disc.
4. Check BIOS setup if "onboard 6CH H/W audio" is enabled.
5. If sound already installed, check our website for audio driver
update.
I cannot get the sound working on the 5.1 channel speaker.
1. Install the audio driver and application. Check driver installation
for more info.
2. Check if the settings in the 5.1 speaker control box are correct, like
if you have a SPDIF connector but the setup in the speaker box is
set to analog.
3. Check if the speaker connection to the M/B is correct.
4. Make sure the software setup is correct. Check manual for more
info.
The sound is working in my system, but when I play CD music from the
CD-ROM, I do not get any sound. What is wrong?
This is because the 3-wire audio cable from the CD-ROM to the on-board
183
.