SOYO SY-KT400 Dragon Ultra User Manual page 26

Hardware Installation SY-KT400 DRAGON Ultra
This motherboard offers two primary and two secondary IDE device connectors
(IDE1, IDE2), can support up to four high-speed Ultra DMA 33/66/100/133
HDD or CD-ROM. IDE3 & IDE4 can support up to four high-speed Ultra DMA
33/66/100/133 HDD.
Connect one side of the ATA 66/100 flat cable to the IDE device (HDD or
CD-ROM) and plug the other end to the primary (IDE1, IDE3) or secondary
(IDE2, IDE4) directionally keyed IDE connector on the motherboard. The ATA
66/100/133 cable is backward compatible with ATA33 HDDs. Please note that
IDE3 & IDE4 only support HDD, CD-ROM is not supported.
This motherboard can support up to 8 HDDs.
There are four HDD connectors (IDE1, IDE2, IDE3, IDE4) on motherboard.
IDE3 & IDE4 are provided for IDE RAID function or standard IDE function.
Please refer to Chapter 6 for more information on IDE RAID function.
80-Conductor
ATA 66/100
Flat Cable
40-pin
1
39
39
1
21