SOYO SY-KT400 Dragon Ultra User Manual page 118

Enter to confirm.
3.
In the validated channel status, select the source disk of the
mirror array and then press Enter.
4.
In the menu, select
Enter to confirm.
5.
In the validated channel status, select the target disk of the
mirror array and then press Enter.
6.
In the menu, select
Enter
to confirm.
7.
Press Y
Continue?
Note:
When there is no RAID 1 array, system will prompt user
disks at the second step, and rebuild cannot continue.
IV. Add Spare Disk
The following steps shall be taken to add the spare disk.
1.
In the menu, select
confirm.
2.
In menu, select
Enter to confirm.
3.
In the validated channel status, select the mirror array and
press Enter
4.
In the menu, select
Enter to confirm.
5.
In the validated channel status, select the spare disk to be
added and press
V. Remove Spare Disk
The following steps shall be taken to remove the spare disk.
1.
In the menu, select
to confirm.
2.
The 1. Select Mirror Array: None
2. Select Target Disk: None
3. Start Duplication Process
when asked The last time rebuild not completed.
4. Add Spare Disk
1. Select Mirror Array: None
to confirm.
2. Select Spare Drive: None
Enter
5. Remove Spare Disk
to confirm.
item appears in the menu.
113
and press
and press
No enough
and press Enter
and press
and press
and press Enter
to