SOYO SY-KT400 Dragon Ultra User Manual page 108

Highpoint HPT372 Driver Installation
Install driver during Windows 2000 installation
1. Go to "d:\raid\hpt372_234\" directory, (assuming that
your CD-ROM is drive d) copy all the files and directory
to a floppy disk.
2. If Windows 2000 is installed from the floppy drive, please let
the installing program run automatically. If Windows 2000 is
installed from the CD-ROM drive, please
message
or RAID driver
3. Press
Windows 2000 Setup
4. Insert the floppy disk of driver, then press
5. The system will ask whether to install driver under
under Windows
Windows 2000.
6. In the follow-on window of device type, please select
and press
7. The follow-on interface will list the devices to be installed, in
which HPT370/HPT372 UDMA/ATA RAID Controller
should be included (If users want to install other devices,
please operate at this time. If all devices have been
successfully installed, please go to next.)
Press F6 if you need to install third party SCSI
appears.
S key to specify additional devices when the
2000, please select to install driver under
Enter to continue.
SY-KT400 DRAGON Ultra
window appears.
103
F6 key when the
Enter to continue.
WinNT
Other
item
or