SOYO SY-KT400 Dragon Ultra User Manual page 119

3.
In the validated channel status, select the spare disk to be
removed and press
VI. Set Disk Mode
The following steps shall be taken to set the disk mode.
1.
Select
confirm.
2.
Select the disk mode to be set in the popup selection box and
press Enter
VII. Set Boot Disk.
The following steps shall be taken to set the boot disk:
1.
In the menu, select
confirm.
2.
In the validated channel status zone, use the arrow key to
select the boot device and press
Note:
1.
The Set Boot Disk
disk is connected to IDE on motherboard.
2.
After the boot disk is set, its status will become Boot.
Enter
6. Set Disk Mode
to confirm.
7. Set Boot Disk
item appears on condition that no hard
to confirm.
in the menu and press
item, press
Enter to confirm.
114
Enter to
Enter to