SOYO SY-KT400 Dragon Ultra User Manual page 190

Can I use my CD-ROM or other IDE device (except HDD) on IDE 3 & 4?
No, HPT 372 only support Hard disk.
Can I use IDE 3 & 4 as a normal IDE channel?
Yes, no need to change any settings in the BIOS. Just make sure to install
the driver, check Chapter 6 for more info.
I cannot get the HDD to boot from IDE 3 or IDE 4, why?
st
Make sure that the 1 boot device in the BIOS is set to SCSI.
Boot-up from my IDE3/4, I get blue screen upon entering Windows
system
Make sure the raid option in the BIOS is enabled.
LAN Issues
During LAN driver installation, the system hangs on 75%, why?
Enable the onboard LAN in the BIOS setup.
I have problem installing Novell NetWare v.50
Disable the APIC option in the BIOS.
For updated FAQs, please check http://www.soyo.com.tw/faq.htm or
http://www.soyousa.com/faqs.html
185