SOYO SY-KT400 Dragon Ultra User Manual page 45

Hardware Installation
Manually set CPU frequency.
Once the "CPU Frequency Mode" is set to "Manual", the CPU FSB (Front
side Bus speed) can be changed from the range of 0~255MHz. Of course not
all the setting will work for your CPU. For Current AMD Athlon XP, the
standard rated FSB is either 100 MHz or 133MHz. By changing your CPU
FSB to a higher speed other than it is rated is called 'overclock'. The
maximum speed your CPU can be overclocked is depended on your
components. This can be determine by gradually increase your CPU FSB
until it started to lock your system up. To change the CPU Frequency,
highlight the "Frequency 1MHz Stepping" and a pop up screen will show.
You can key in the frequency your CPU can run follow by the 'Enter' key.
System Performance
CPU Frequency Mode
Frequency 1MHz Stepping
CPU To PCI Divider
DRAM:AGP:PCI Clock
DRAM Clock
CPU Ratio Select
CPU Voltage Select
DDR (2.5V) Voltage Select
AGP (1.5V) Voltage Select
Advanced Tune-up Settings
C.I.H. 4-WAY Protection
Onboard 6Ch H/W Audio
Overclocking a CPU is at your own risk. It may permanently damage your
CPU and void your warranty.
Phoenix – Award BIOS CMOS Setup Utility
SOYO COMBO Feature
Normal
Manual
100
/3
SPD: 66: 33
133
Auto
Default
Default
Default
Press Enter
Disabled
Enabled
SY-KT400 DRAGON Ultra
Menu Level
40
Item Help