Chapter 6 Highpoint Hpt372 Driver Installation - SOYO SY-KT400 Dragon Ultra User Manual

Highpoint HPT372 Driver Installation
Highpoint HPT 372 Driver Installation
You can use your HPT372 as
1. Normal IDE function.
2. RAID function.
To use IDE3 and IDE4 as normal IDE, please do the following steps
1. Enable on-board IDE RAID in the bios.
2. Install the HP372 driver, see driver installation instruction below.
To use IDE3 and IDE4 as RAID controller, see Appendix A (getting
started section) for installation procedure.
To boot from the HPT372 controller, (IDE 3 or IDE 4)
1. Go to the BIOS setup and set the First Boot device to SCSI.
2. Set the "RAID/ATA & SCSI boot order" to "RAID/ATA,SCSI".
Installing RAID Driver on an Existing System
Windows 9x/ME Installation
If Windows can not find new hardware, the driver can be installed
through the following steps:
1. Shut down all programs.
2. Click Start-->Setup-->Control
Add New Hardware
3. Click Next
4. A dialog box will appear and ask whether to let windows
Chapter 6
icon.
in the popup window to continue.
99
SY-KT400 DRAGON Ultra
Panel, then double-click on