Table of Contents
Advertisement
Hardware Installation
Standard User Setting
For a standard User, the best way to configure the BIOS settings is to
choose "Load Optimized setup default". This will set the BIOS to the
optimized settings. The CPU and Memory will be set automatically.
Advanced User settings
The default setting in the SOYO Combo setup is set to "AUTO". It can be
changed to "Manual" for advance User to have better control of the BIOS.
If "Manual" option is selected, there are few rules that have to be following.
Incorrect setting will either overclock or underclock the components and
thus shorten the live of the components.
Selecting "CPU Frequency Mode" to "AUTO/Manual".
To set the "CPU frequency Mode" to "Manual", highlight the option using
up and down key. Press 'Enter' and a pop up manual will show the desire
settings. Move the 'up' or 'down' arrow key to set "Manual", then hit 'enter'.
The CPU frequency mode is now set to "Manual" setting, which means you
can change the frequency of the CPU from the actual frequency. (Refer to
picture)
System Performance
CPU Frequency Mode
X Frequency 1MHz Stepping
X CPU To PCI Divider
X DRAM:AGP:PCI Clock
DRAM Clock
CPU Ratio Select
CPU Voltage Select
DDR (2.5V) Voltage Select
AGP (1.5V) Voltage Select
Advanced Tune-up Settings
C.I.H. 4-WAY Protection
Phoenix – Award BIOS CMOS Setup Utility
SOYO COMBO Feature
Normal
Auto
100
/3
SPD: 66: 33
133
Auto
Default
Default
Default
Press Enter
Disabled
SY-KT400 DRAGON Ultra
Menu Level
39
Item Help
Hide quick links:
Advertisement
Table of Contents
