Table of Contents
Advertisement
Screened transfer
Press the
button + extension (or outside number) + #. To complete the transfer, press
the Transfer softkey or hang up. To cancel transfer, press the EndCall softkey and then
the Resume softkey to connect to the caller on hold.
Blind transfer
Press the
button + extension (or outside number) + Dial softkey, then hang up. If an
extension is tied to a programmable key, then during the call, press that key to transfer.
Voicemail transfer
Press the
button + * + extension + Dial softkey, then hang up.
Park a caller
Press the programmed Park key. Otherwise, press the
will respond with a parking orbit.
Retrieve a parked caller
At the dial tone, press the programmed UnPark key, then dial orbit + #. Otherwise, dial **
+ orbit + #.
Two-way intercom/group paging to FortiVoice phones
Press the programmed Intercom or Group Page key + extension + Dial softkey. Otherwise
dial *84 (Intercom) or *85 (Paging) + extension + #.
PA overhead paging
Press the programmed Overhead Paging key, or dial *0 + #.
Attach account code to last call
At dial tone, dial *88 + #. When prompted, enter <Account code> + #.
CDR logging must be active.
Voicemail
Access Mailbox — Locally
Access Mailbox — Remotely
Change greeting options
Change personal options (password, date stamp, remote notification options)
MESSAGE PLAYBACK CONTROLS
Rewind 10 seconds
Go to beginning
Skip ahead 10 seconds
Skip to end of message
2 4
F O R T I F O N E - 4 5 0 i A N D F O R T I F O N E - 5 5 0 i T E L E P H O N E S T A R T G U I D E
button + *510 + #. The system
Press the Vmail softkey or the
Press ** + <mailbox number>
button.
Dial 2
Dial 3
Dial 1
Dial 1 1
Dial 3
Dial 3 3
Advertisement
Table of Contents
