3 — Installing and connecting the 8550 WSG
Figure 3-22 Screwing the arm assembly back to the bracket
The cable management arm with a right-hand swing is now ready for
installation on the rack, as described in Procedure 3-6.
3.9
Connecting the AC power cords to the 8550 WSG
Use this procedure to connect the two AC power cords to the
8550 WSG.
Danger —
Do not disable or tamper with it.
Procedure 3-8 To connect the AC power cords
1
Connect the power cords to the rear of the 8550 WSG.
2
Install the power cord anchor on the handle of the power supply.
3
Secure the cord to the cable management arm.
4
Connect the power cord to the AC power source.
3-22
Alcatel-Lucent OmniAccess 8550 WSG Installation Guide, Release 2.0
Grounding is provided by the power cord grounding plug.
September 2007
3HE03334AAAATQZZA Edition 02
3
19295