Figure 3-3 Screwing the rail mounts into the rack
3.5
Attaching the 8550 WSG to the rails
Attach the 8550 WSG to the service rack rails.
Note —
8550 WSG to the second set of rails you installed in Procedure 3-3.
Connect the two 8550 WSGs with the 15-ft crossover Ethernet cable
using the High Availability port, as described in Procedure 3-5.
Alcatel-Lucent OmniAccess 8550 WSG Installation Guide, Release 2.0
September 2007
3HE03334AAAATQZZA Edition 02
3 — Installing and connecting the 8550 WSG
In a High Availability configuration, attach a second
19305
3-7