Procedure 3-4 To Attach The 8550 Wsg To The Rails - Alcatel-Lucent OmniAccess 8550 Installation Manual

3 — Installing and connecting the 8550 WSG
Warning 1 —
slides into the slide mounting brackets.
Warning 2 —
slide the inner slides into the slide mounting brackets.
Warning 3 —
equipment weight, with the heaviest piece going at the bottom.

Procedure 3-4 To attach the 8550 WSG to the rails

1 Attach the sliding rails to the sides of the 8550 WSG, as shown in
Figure 3-4.
2 Slide the 8550 WSG into the rail mounts, as shown in Figure 3-5.
Warning — To reduce the risk of personal injury, be careful when you
slide the 8550 WSG into the rail mounts. The sliding rails could pinch your
fingers.
3-8 Alcatel-Lucent OmniAccess 8550 WSG Installation Guide, Release 2.0
Stabilize the rack assembly before you slide the inner
Keep the 8550 WSG parallel to the floor when you
Populate the rack from the bottom to the top based on
Figure 3-4 Attaching the sliding rails
September 2007 3HE03334AAAATQZZA Edition 02
19275