Table of Contents
Advertisement
25.2.1 Configuring the WWW Screen
Click Maintenance > Remote MGMT to display the WWW screen.
Figure 142 Maintenance > Remote MGMT > WWW
The following table describes the labels in this screen.
Table 86 Maintenance > Remote MGMT > WWW
LABEL
Server Port
Server Access
Secured Client IP
Address
VMG1312-T10C User's Guide
DESCRIPTION
This displays the service port number for accessing the Device using HTTP or HTTPS. If
the number is grayed out, it is not editable.
Select the interfaces through which a computer may access the Device using this
service.
Note: It is recommended if you are allowing WAN access even temporarily to change the
default password (in Maintenance > User Account). To allow access from the
WAN, you will need to configure a WAN to Router firewall rule.
A secured client is a "trusted" computer that is allowed to communicate with the Device
using this service.
Select All to allow any computer to access the Device using this service.
Choose Range to just allow the computers with an IP address in the range that you
specify to access the Device using this service.
Chapter 25 Remote Management
207
Advertisement
Table of Contents
