Making Up Guide Blades For Curved, Pointed Darts - Pfaff 3566-2/02 Instruction Manual

13

Making up guide blades for curved, pointed darts

.02
Program dart length + 7 mm and position work-holder bar.
Secure blank for guide blade to guide-blade carrier.
Engage guide blade and lower work-holder bar.
Transfer contour of work-holder bar to guide blade using a scribe (Fig. 13-04).
Scribe an intersection 5 mm to the right from the cutout in the wrok-holder
bar (Fig. 13-05).
Disengage and remove the guide blade.
Scribe a new line parallel and at a distance of 1.5 mm to the scribed contour of the work-
holder bar (Fig. 13-06).
Blank for guide blade
95-752091-16
Fig. 13 - 04
Fig. 13 - 05
Making up styling parts
work-holder bar
13 - 3