Table of Contents
Advertisement
Controls
7
Control panel for quick-change of engaging depth
.04
Control panel B is used for increasing or decreasing the engaging depth of the guide blade
in steps of 0.3 mm each for adaption to different material thicknesses (see also Chapter
10.06.02 Correcting the engaging depth). The selected change of engaging depth is
indicated by the luminous diode of the corresponding key.
Examples:
7 - 6
Control panel 1 only functions in the basic position of the machine and in the
SEWING mode.
+0
+1
Fig. 7 - 04
Key +0 pressed: the engaging depth input in the seam program is used.
Key +1 pressed: engaging depth of 0.3 mm is added to the depth input in the seam
program.
Key –3 pressed: engaging depth of 0.9 mm is subtracted from the depth input in the
seam program, provided an engaging depth of higher than 0.9 is input.
The plus/minus keys of control panel 1 have no function.
B
-3
Advertisement
Table of Contents
