Table of Contents
Advertisement
Setting up
9
Bobbin changing (PFAFF 3566-3/02)
.07
1
2
-
3
+
Fig. 9 - 07
Fig. 9 - 08
Switch on machine.
Select SEWING mode.
Press threading aid key.
Remove bobbin case.
Open cover.
Lift latch 1 and remove bobbin case 3.
Insert bobbin in bobbin case:
Insert bobbin in bobbin case.
Pull the thread through the slot and under the spring as shown in Fig. 9-08.
Regulate the thread tension by turning screw 3.
When the thread is pulled, the bobbin must turn as shown by arrow.
Insert bobbin case:
Lift latch 1 and insert bobbin case 2 with bobbin into sewing hook.
Release latch 1 and push bobbin case 2 lightly to make sure it snaps in place.
Close cover.
Set machine ready for operation again by pressing threading aid key.
9 - 7
Advertisement
Table of Contents
