Pfaff 3566-2/02 Instruction Manual page 17

Controls
Basting stitch seam
When this function is enabled (diode lights up) an additional basting seam is sewn.
Angular seam
When this function is enabled (diode lights up) an angular seam is sewn, i.e. a seam that
is not parallel with the end of the fabric.
Engaging depth
When this function is enabled (diode lights up) up to 40 mm is added to the engaging depth
of the guide blade at present in use.
Start backtack
When this function is enabled (diode lights up) a backtack is sewn.
Stitch condensation at beginning of seam
When this function is enabled (diode lights up), condensed stitches are sewn at the
beginning of the seam.
Finish backtack
When this function is enabled (diode lights up) a finish backtack is sewn.
Stitch condensation at end of seam
When this function is enabled (diode lights up), condensed stitches are sewn at the end of
the seam.
Enter key
This key is for verifying the input settings and dialogs (access to functions).
Clear key
For resetting input values.
Esc key
For interrupting functions without verifying inputs (reversing menus).
Plus key
For increasing input values step by step,
for answering dialog prompts with "yes" and
for scrolling through the menu guide.
Minus key
For decreasing input values step by step,
for answering dialog prompts with "no" and
for scrolling backwards through the menu guide.
Number keys
. . .
These serve to input values and
select menu functions direct.
7 - 5