Table of Contents
Advertisement
9
Winding the bobbin thread and regulating the winder tension
.05
(PFAFF 3566-3/02)
3
Fig. 9 - 05
Place an empty bobbin 1 on winding spindle 2.
Thread up as shown in Fig. 9-05 and wind thread clockwise a few times around
bobbin 1.
Engage bobbin winder by pressing winder spindle 2 and trip 3 simultaneously.
The tension of thread on bobbin 1 is set on knurled nut 4.
The bobbin winder stops automatically when enough thread is wound on bobbin 1.
If the thread is wound on unevenly:
Loosen nut 5.
Turn thread guide 6 accordingly.
Tighten nut 5.
1
2
Bobbin 1 is wound during sewing.
Setting up
4
-
+
6
5
9 - 5
Advertisement
Table of Contents
