Table of Contents
Advertisement
3 - SPEEDS
In this main function a number of part-functions can be selected for changing different
speeds.
The settings are changed by pressing the plus/minus keys or the number keys.
. . .
1 - MAXIMUM SPEED
2 - BACKTACK SPEED
3 - BASTING-SEAM SPEED
4 - SWITCH FUNCTIONS
In this main function the user can program a number of machine functions in the part-
functions according to his requirements.
1 - THREAD MONITOR FUNCTIONS
In this part-function the thread monitor functions are listed which can be enabled or
disabled using number keys 1 or 0.
1 - NEEDLE THREAD MONITOR
2 - BOBBIN THREAD MONITOR
3 - BOBBIN THREAD SENSOR (Optional)
2 - LANGUAGES
In this part-function different languages are listed from which the user can select the
required language.
1 - GERMAN
2 - ENGLISH
3 - FRENCH
4 - SPANISH
5 - BASIC SETTINGS
When an unknown seam program is input and when the seam utilities, basting seam or
angle seam are enabled, these basic settings are suggested.
The inputs for these basic settings can be changed within this part-function using the plus/
minus keys or number keys.
. . .
The basic setting can also be changed later again when the seam program is input.
1 - START BACKTACK LENGTH
2 - COND. ST. AT BEG. OF SEAM, LENGTH/ST. LENGTH
3 - FINISH BACKTACK LENGTH
4 - COND. ST. AT END OF SEAM, LENGTH/ST. LENGTH
5 - BASTING SEAM LENGTH
6 - BASTING SEAM ANGLE
7 - ANGLE SEAM LENGTH
8 - ANGLE SEAM RADIUS
9 - ANGLE-SEAM ANGLE
Programming
10 - 6
Advertisement
Table of Contents
