Sequence Programs (Different Darts/Pleats In Sequence) - Pfaff 3566-2/02 Instruction Manual

10

Sequence programs (different darts/pleats in sequence)

.07
Program numbers 90 to 99 are reserved for sequence programs. In these program numbers
up to eight individual programs can be combined in one sequence and processed one after
the other later in the SEWING mode.
Select the INPUT mode.
Press the seam input key.
Select program number (90 to 99), e.g. 90.
Select the first required program for the sequence, 20.
Press the enter key.
Select the second required program for the sequence, e.g. 4.
Press the enter key.
and so on.
The inputs are concluded by selecting the INPUT mode.
For re-sewing, e.g. after a thread break, the required program number can be
selected by pressing the plus/minus keys.
Programming
10 - 18