Changing The Guide Blade ( Pfaff 3566-3/02 ); Changing The Work-Holder Bar ( Pfaff 3566-2/02 ); Changing The Guide Blade; Changing The Work-Holder Bar - Pfaff 3566-2/02 Instruction Manual

Setting up
9

Changing the guide blade

.08
9

Changing the work-holder bar

.09
9 - 8
Fig. 9 - 09
Switch machine off!
Press lever 1 upwards.
Remove guide blade 2.
To insert, simply reverse this procedure.
2
1
3
Fig. 9 - 10
1
Removing the work holder bar:
Switch the machine on, then off again,
so that work holder bar 1 is set at its
basic position.
Push lever 2 down, and remove work
holder bar 1.
Refitting the work holder bar:
Push work holder bar 1 between the
front guide rollers.
Secure work holder bar on carrier 3 and
push lever 2 up.
2