In the procedure below, it is assumed that:
-
there is one DHCP server
-
no VLAN has to be configured.
Prerequisites
None.
Relocating and retaining the same set
To relocate and retain the same set:
1. Unplug the set.
2. Plug the set into a connector at its new location.
4.5.1.1.3 The Alcatel-Lucent IP Touch 4008 Phone set
The Alcatel-Lucent IP Touch 4008 Phone is a cost reduction of the Alcatel-Lucent IP Touch
4018 Phone with a new transceiver and a new LAN switch.
The Alcatel-Lucent IP Touch 4008 Phone configuration is the same as the Alcatel-Lucent IP
Touch 4018 Phone configuration: both sets share the same profile.
The Alcatel-Lucent IP Touch 4008 phone Extended Edition configuration is the same as the
Alcatel-Lucent IP Touch 4018 Phone configuration.
4.5.2
IP Touch 4028/4038/4068 Phone
4.5.2.1
Commissioning
4.5.2.1.1 Overview
This module presents all the actions required for commissioning: .
-
The Alcatel-Lucent 8 series:
•
Alcatel-Lucent IP Touch 4028 Phone
•
Alcatel-Lucent IP Touch 4038 Phone
•
Alcatel-Lucent IP Touch 4068 Phone
-
The Alcatel-Lucent IP Touch 8 series phone Extended Edition:
•
Alcatel-Lucent IP Touch 4028 phone Extended Edition
•
Alcatel-Lucent IP Touch 4038 phone Extended Edition
•
Alcatel-Lucent IP Touch 4068 phone Extended Edition
The commissioning of Alcatel-Lucent 8 series and Alcatel-Lucent IP Touch 8 series phone
Extended Edition is the same.
In the following sections, when Alcatel-Lucent IP Touch 4028 Phone, Alcatel-Lucent IP Touch
4038 Phone and Alcatel-Lucent IP Touch 4068 Phone are mentioned, they refer to the two
ranges of sets (Alcatel-Lucent 8 series and Alcatel-Lucent IP Touch 8 series phone Extended
Edition), unless specifically indicated.
The following figure illustrates the connectors on the base of each set.
4-53